IDesign Series training tables and options are designed to provide style that won't break your budget or your back. These folding tables are 75% lighter than "lightweight" competitors and are half the price. They have a substructure of aircraft-grade aluminum and a table top surface of pressure-sealed laminate. View Site The aluminum substructure gives these tables a lightweight factor which no one else can offer. The iDesign Series are ideal for conference settings, training tables, classrooms, and many other indoor venues.
Table Subsurface
All top panels, cross bracing and end caps are high strength alloy 6063-T6 extruded aluminum smooth finish. Top surfaces are .080” thick with integral stiffener ribs; perimeter edges are heavy gauge and have a high impact cast corner protective insert which will take abuse from frequent set-up/take down. Aluminum feedstock contains recycled aluminum. Southern Aluminum products are recyclable. Painted surfaces are thermal set powder-coated finishes and have the hardest surface and maximum scratch/mar resistant qualities in the industry. Table edges utilize a reinforced inside radia impact resistant design capable of withstanding frequent usage. Fasteners are aluminum rivets and zinc-plated steel. All edges on the table top have a smooth rounded edge, including corners. Table will withstand a drop squarely on its edges/corners from a height of 24” without splitting apart, cracking or creating sharp corners. Southern Aluminum products have a Lifetime Guarantee – for as long as you own them!
Table Surface
Inlay surface is high pressure laminate from WilsonArt™ with premium scratch resistant finish, permanently bonded with contact adhesive. Manufacturer provides 5-year warranty on laminate.
Colors
View laminate options and inlay colors at www.wilsonart.com. View perimeter and leg colors at www.alulite.com or call the factory for samples.
Load Capacity
All tabletops will support up to 4,000 lbs. of distributed weight. All aluminum leg styles are tested to exceed 2,000 lbs. of direct weight on each leg.
Legs
All legs, except I Leg style, are welded together for strength, then attached to the table with zinc-plated bolts and nuts. All leg styles are a standard 29” height. Legs will not conduct electrical current. Powder-coat paint is applied for finishing on all leg styles except Chrome I Leg style. Tube openings are covered by caps.
H, Roman, & Seminar Leg Styles
The H, Roman, and Seminar folding legs are 1 1/2” extruded square aluminum with .065” wall thickness high strength alloy 6063-T6 aluminum smooth finish.
